CE Fast-Track

    CE certified in under two weeks

    Most certification jobs stall in pre-compliance limbo for months. We built a packaged CE and RED path with an accredited lab, so your IoT device is market-ready fast, at a price you know up front.

    Get a certification quote See how it works
    < 2 wks
    typical CE turnaround
    Fixed
    price, quoted up front
    CE · FCC · RED
    regional approvals

    Certification shouldn't be the part that kills your launch

    Radio products fail their first EMC test more often than they pass. When that happens without a plan, you're weeks from a board re-spin and months from the shelf.

    We review the design for compliance before anything goes near a lab, then run the testing, documentation and lab coordination as one packaged job. You get a fixed quote and a date, not an open-ended consulting bill.

    Pre-compliance review

    We check the PCB, radio and firmware against the standards first, so the official test confirms what we already know instead of surprising you.

    Accredited lab, managed end to end

    Testing, the technical file, and every back-and-forth with the lab handled for you. You sign once.

    CE, FCC and regional approvals

    RED, EMC and LVD for Europe, FCC for the US, and the regional radio approvals your target markets need.

    Fixed price, known date

    You get the scope, the cost and the turnaround before we start. No hourly surprises.

    Why this is faster than the usual route

    • Most agencies give you pre-compliance advice and then hand you off to a lab to work out the rest. We own the whole path.
    • Building certification into the hardware and firmware early is the single biggest way to avoid a failed test and a re-spin.
    • We already work with an accredited lab on a standing basis, so there's no procurement delay or first-time-client ramp-up.

    Frequently asked questions

    How can CE certification take under two weeks?

    Because the design has already passed our pre-compliance review before it reaches the lab, and we work with an accredited partner lab on a standing basis. The official test confirms what we checked, rather than discovering problems.

    What does it cost?

    You get a fixed quote after a short review of your design. The price depends on the radios in your device and your target markets, but you know it before we start.

    Can you certify a product you didn't design?

    Yes. We start with a pre-compliance review of your existing hardware and firmware, then manage the testing, documentation and lab coordination from there.

    Which markets and standards do you cover?

    CE (RED, EMC, LVD) for Europe, FCC for the US, and regional radio approvals. We can also arrange environmental and safety testing such as IP rating, vibration and HALT.

    What if the product fails a test?

    Because of the pre-compliance step this is rare, but if something comes up we diagnose it and tell you the fix, whether that's a firmware change or a board tweak. No mystery, no runaway bill.

    Ready to get certified?

    Send us your product and we'll come back with a fixed-price certification plan.